eBay Classifieds » All ads » Jobs » 

cnc machine operator in Milwaukee

(1-24 of 83 ads)
View as:
Categories
  1. CNC Machine Operator, New Berlin WI at Express Employment Professionals

    Were seeking a qualified candidate to fill the position of a CNC Machine Operator in New Berlin, WI with machine shop experience....

    Ads
    1. Plastic Production Trainees-$9/hour.  $11.00 when hired!!

      Ideal candidates will be willing to learn any/all of the following areas:• Assisting machine operators with unloading thermoforming machines. Trimming off excess plastic ( flash), using various hand tools (drill, screwdriver, etc) to put hardware onto the pieces• CNC Secondary operations -- running secondary machine to shape, cut, trim or form parts• Stacking, packaging and labeling parts• ...

    2. CNC Operator & Programmer

       CNC Opeator & Programmer Milwaukee, WI direct hireMajor Job Responsibilities:Production and inspection of piston rings to proper dimensions and tolerancesProper machine set-upRunning of a single machine and/or multiple production cells per established standards of quantity (run rates) and quality (less than 2% scrap)Simple machine maintenance to ensure safe operation; including same day ...

    3. 3rd Shift Production Tech 1789

      Pay Rate: $21.00/hr. Essential Duties and Responsibilities:Sets up, adjusts and operates CNC controlled machining centers to perform a series of progressive operations on to close and exacting tolerances and finish specifications requiring considerable skill, general knowledge of machining techniques, methods, and familiarity with numerically controlled machine tool operational procedures.  ...

    4. CNC Operator & Programmer

        CNC Opeator & Programmer Milwaukee, WI direct hire Major Job Responsibilities: Production and inspection of piston rings to proper dimensions and tolerances Proper machine set-up Running of a single machine and/or multiple production cells per established standards of quantity (run rates) and quality (less than 2% scrap) Simple machine maintenance to ensure safe operation; including ...

    5. CNC Machinist

      CNC Machinist - Lathe/Mill Setup & Programming Shifts: Multiple shifts available, full-time Trillium Staffing, a leader in the staffing industry is currently seeking a CNC Macinist in the Germantown, WI area! Position: CNC Machinist - Lathe/Mill Setup and Programming Shifts: Multiple shifts available, full-time Position Summary: Operates conventional and computer numerical control (CNC) ...

    6. Production Workers/ Machine Operator Assistants

      Production Workers: $9.00 ( up to $11.00 when hired) 1st shift : 7am – 3:30 pm 2nd shift: 3:00 pm – 11:30 pm 3rd shift: 11:00pm – 7:30am Ideal candidates will be willing to learn any/all of the following areas: Assisting machine operators with unloading thermoforming machines. Trimming off excess plastic ( flash), using various hand tools ( drill, screwdriver, etc) to put hardware onto ...

    7. CNC Operator & Programmer

        CNC Opeator & Programmer Milwaukee, WI direct hire Major Job Responsibilities: Production and inspection of piston rings to proper dimensions and tolerances Proper machine set-up Running of a single machine and/or multiple production cells per established standards of quantity (run rates) and quality (less than 2% scrap) Simple machine maintenance to ensure safe operation; including ...

    8. Applications Engineer- CNC Machine Tools

      Morris Midwest, a regional distributor of CNC machine tools, tooling and accessories, and related engineering and support services, is seeking an ambitious and conscientious Applications Engineer for the Milwaukee, WI territory. We are looking for an experienced Applications Engineer with a background in CNC Machinery. This role will provide exciting opportunities to work for a dynamic ...

    9. Production Worker 1st and 2nd shifts

      Ideal candidates will be willing to learn any/all of the following areas: • Assisting machine operators with unloading thermoforming machines. Trimming off excess plastic ( flash), using various hand tools (drill, screwdriver, etc) to put hardware onto the pieces • CNC Secondary operations -- running secondary machine to shape, cut, trim or form parts • Stacking, packaging and labeling parts ...

    10. Plastic Production Trainees-$9/hour.  $11.00 when hired!!

      Ideal candidates will be willing to learn any/all of the following areas: • Assisting machine operators with unloading thermoforming machines. Trimming off excess plastic ( flash), using various hand tools (drill, screwdriver, etc) to put hardware onto the pieces • CNC Secondary operations -- running secondary machine to shape, cut, trim or form parts • Stacking, packaging and labeling parts ...

    11. Plastic Production Trainees-$9/hour.  $11.00 when hired!!

      Ideal candidates will be willing to learn any/all of the following areas: • Assisting machine operators with unloading thermoforming machines. Trimming off excess plastic ( flash), using various hand tools (drill, screwdriver, etc) to put hardware onto the pieces • CNC Secondary operations -- running secondary machine to shape, cut, trim or form parts • Stacking, packaging and labeling parts ...

    12. Manufacturing Engineer

      Manufacturing Engineer SUMMARY: The Manufacturing Engineer is responsible for supporting Operations by troubleshooting production issues, improving manufacturing methods and assisting Engineering in the development of new parts. This position reports directly to the Director of Engineering. ESSENTIAL FUNCTIONS: • In collaboration with the Director of Manufacturing, provide engineering support ...

    13. Tool Maker - Temp position (1-4 mos)

      General Summary  Plan and perform difficult machine set ups and operations to construct, alter, and repair a wide variety of intricately designed parts and details having a multiplicity of related dimensions of very close and exacting nature for tools, gages, jigs, maintenance items, simple dies and fixtures. Work with little to no direction from the supervisor or lead. Verify and maintain ...

    14. CNC Programmer / Operator

      Sets up and operates numerical control machine or machining centers to perform various machine functions such as: Cutting Drilling Milling Reaming Boring Broaching of metallic and nonmetallic work pieces Job Requirements Experience with Mastercam software is a must Basic algebra and geometry Read, write and speak English Able to understand and carryout instructions ...

    15. CNC Operator & Programmer

        CNC Opeator & Programmer Milwaukee, WI direct hire Major Job Responsibilities: Production and inspection of piston rings to proper dimensions and tolerances Proper machine set-up Running of a single machine and/or multiple production cells per established standards of quantity (run rates) and quality (less than 2% scrap) Simple machine maintenance to ensure safe operation; including ...

    16. CNC Programmer

      CNC Mill Machinist  Must have 3-5 years prior exp. Must be self starter able to work with minimal supervision.  Experience with Master-Cam preferred.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each of the Major Responsibilities,including the following:• Loads material in machine. Starts machine and observes cutting operation• Ability to finish set up ...

    17. Programming Engineer

      This position provides all programming, fixturing, tooling, and process optimization support for all CNC machinery and manual equipment within the facility.  Provides necessary support to all production machine operators and operations management where necessary. Using CAM software, develops multi-functional, multi-axis code to program machinery and ensures that all programs are debugged and ...

    18. CNC Programmer

      CNC Mill Machinist  Must have 3-5 years prior exp. Must be self starter able to work with minimal supervision.  Experience with Master-Cam preferred.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each of the Major Responsibilities,including the following:• Loads material in machine. Starts machine and observes cutting operation• Ability to finish set up ...

    19. Mold Maker

      The Mold Maker is responsible for the manufacture and repair of jigs, fixtures and custommachined components, as well as the construction, maintenance and modification of wax patterntooling. This position is for our night team working a 12-hour shift from either on day shift from 6 am to6 pm or on the night shift from 6pm to 6am on a 2-2-3 schedule (2 days working, 2 days off, 3 days working ...

    20. CNC Programmer

      CNC Mill Machinist  Must have 3-5 years prior exp. Must be self starter able to work with minimal supervision.  Experience with Master-Cam preferred.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each of the Major Responsibilities,including the following:• Loads material in machine. Starts machine and observes cutting operation• Ability to finish set up ...

    21. CNC Programmer

      CNC Mill Machinist  Must have 3-5 years prior exp. Must be self starter able to work with minimal supervision.  Experience with Master-Cam preferred.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each of the Major Responsibilities,including the following:• Loads material in machine. Starts machine and observes cutting operation• Ability to finish set up ...

    22. Mold Maker

      The Mold Maker is responsible for the manufacture and repair of jigs, fixtures and custommachined components, as well as the construction, maintenance and modification of wax patterntooling. This position is for our night team working a 12-hour shift from either on day shift from 6 am to6 pm or on the night shift from 6pm to 6am on a 2-2-3 schedule (2 days working, 2 days off, 3 days working ...

    23. Programming Engineer

      This position provides all programming, fixturing, tooling, and process optimization support for all CNC machinery and manual equipment within the facility.  Provides necessary support to all production machine operators and operations management where necessary. Using CAM software, develops multi-functional, multi-axis code to program machinery and ensures that all programs are debugged and ...

    24. CNC Programmer

      CNC Mill Machinist  Must have 3-5 years prior exp. Must be self starter able to work with minimal supervision.  Experience with Master-Cam preferred.QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each of the Major Responsibilities,including the following:• Loads material in machine. Starts machine and observes cutting operation• Ability to finish set up ...